FAAC S418 User Manual

6
1. DESCRIPTION AND SPECIFICATION
The FAAC 418 is an automatic gate operator for swinging gate leafs. It is designed for residential applications and its versatility can
accommodate different combinations of gate weights and lengths. The self-contained S418 operator consists of an electric motor
that drives a worm screw housed in an aluminum casing, with built in positive stops.
The non reversable mechanism guarantees the mechanical locking of the leaf when the motor is not operating. An easy-to-use
release device allows to move the leaf in case of malfunction or a power outage. The rear bracket is adjustable to gurantee maxi-
mum flexifility during the installation phase.
The S418 Operator is designed and manufactured to automate vehicular swing leaf gates. Do not use for any other purpose.
Fig. 1
Fig. 2
1.1 Dimensions
32 ½
5
13¾
4¼
* Dimensions in Inches
1 Operator 6 Power Cable
2 Release Device 7 Front Bracket
3 Mechanical Stop at Closing 8 Adjustable Rear Bracket
4 Mechanical Stop at Opening 9 Rear Fork
5 Cable Cover
S418 OPERATOR

FAAC S418 Specifications

General

Power Supply	230V AC (+6% -10%) 50Hz
Motor Voltage	24V DC
Operating Temperature	-20°C to +55°C
Protection Class	IP54
Limit Switch Type	Magnetic
Control Voltage	24V DC
Frequency of Use	Intensive use