FAAC TM2 X R COMPACT - Up-Down Mode for 2 Independent Buttons

OPERATION IN UPDOWN MODE FOR 2 INDEPENDENT BUTTONS
Pressing one of the two buttons and releasing,
the motor drives to the desired direction until it reaches
the limits.
To stop the motor
before reaching the
limits press again the
same button.
MOVEMENT TO THE FIRST MIDDLE POSITION
MOVEMENT TO THE SECOND MIDDLE POSITION
UP
DOWN
UP
DOWN
press brie y
< 1 sec
press brie y
< 1 sec
press brie y
press and hold
release
release
release
release
< 1 sec
> 1 sec
< 0,5 sec
.....
< 0,5 sec
.....
If during the movement
the other button is
pressed the motor
changes the direction.
In “dead man” mode it is not possible to move to the middle positions from the
switch.
TM2 X R COMPACT 34 A4518_6H81_Rev.A
EN