UK/IRL
> > > > 21
5.2.5 Preparing the Pure (BF80S)
1) Remove the frame by lifting it up from its support and taking it away.
2) Remove the glass by removing the glass clamps C (see fig. 7), e.g.
with a screwdriver. Careful when removing the glass! Wear gloves!
Before placing the glass back, be sure that there are no fingerprints
on the glass, it is not possible to remove them when they are burnt in.
3) Take the box with the log set out of the combustion chamber
4) Place the right flue restrictor in the combustion chamber. To
determine the right flue restrictor, see paragraph 4.2 and 4.3.
Fig. 8
Fig. 7
To Next Page
Loading...
