UK/IRL
> > > > 53
12 Cleaning and service instructions
Important:
Turn off the fire and allow it to cool down before commencing cleaning.
It is recommended that the fire is inspected/serviced, by a competent
person at least once a year. To maintain the finish on the trim wipe with
soft damp cloth only. Do not use abrasive cleaners, polish or solvents as
these can damage the surface finish.
Cleaning the glass:
To remove the glass to clean it, follow the steps described in
paragraph 4.5;
To clean the glass, follow the steps and suggestions described in
paragrapg 8.1.1;
Be sure that there are no fingerprints on the glass. It is not possible to
remove those prints after you burn the appliance for a while (they are
burnt in).
To Next Page
Loading...
