UK/IRL
> > > > 31
8) Install the appliance.
9) Connect the flexible stainless steel liner onto the appliance using the
100mm pipe (F) as adapter.
10) If the distance from the flue outlet to the sealing plate is bigger then
300 mm, you have to use a concentric pipe first.
11) Slide the outside pipe onto the appliance or concentric extension so
that you have a air tight connection.
6.3 Remote control
The remote control is only meant to regulate the flames, it functions only
when the pilot burner is ignited. It is therefore not possible to ignited the
appliance with the remote control or to shut-off the pilotflame. The
radio-frequency remote control is intended for fireplaces installed in a
domestic setting in all EU countries except Austria, Denmark, Finland and
Greece.
Features:
- Manual control will always remain possible.
- The remote control is a radio frequency type and has been approved
internationally.
- The remote control generates a unique safety code every time you
activate the transmitter, its similar to those used in a car.
- The remote control is easy to install retrospectively.
To Next Page
Loading...
