Faema E92 Elite - Programming the Milk Distribution Key

23.3 Programming the milk distribution key
N.B.: Also valid if the CAPPUCCINO function is not activated.
When the milk distribution key (16) is pressed (shown by the
ÀDVKLQJOHGWKHIROORZLQJPHVVDJHZLOOEHGLVSOD\HG
Milk selection parameters that can be changed are:
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1).
Programming measures using the “SELF-LEARNING”
function: milk dose
To memorize the programming of the milk dose, follow the
procedure herebelow:
1) Place the cup by the cappuccino maker (18).
2) Press the PROG (32) key; the following message will
appear on the display:
when modifying data, the cursor changes to " Æ".
.HHSWKHGLVWULEXWRUNH\SUHVVHGDVHYLGHQFHGE\WKH
 ÀDVKLQJOHGWKHFRIIHHGRVHFRXQWHUVWDUWVIURP]HURDQG
increases in value).
4) When the quantity of milk in the cup has reached the
desired level, release the key (the counter will indicate the
rime that correspond to the set dose).
It is also possible to vary the milk dose or set the dose using
the “+” (34) and “-” keys (35).
When the key (33) is pressed, the following message
is again displayed:
ÀKEY MENU
Milk dose 03.6s
+
16
18
ÀKEY MENU
Milk dose 03.6s
+
Æ
ÀKEY MENU
Milk dose 03.6s
+
62
English