AC Brushless Servo Drive System Manual Ver: 0002
ACa - 3 / 32
Preliminary
Introduction
Fagor offers you a wide range of servo drive systems (AC brushless motor and Analog drive) for
applications requiring between 0.65 and 32 Nm at speeds between 1200 rpm and 4000 rpm.
This manual describes the elements in detail and guides step by step through the installation and
setup of the drive system.
When installed for the first time, it is a good idea to read the whole document.
Should you have any doubts or questions, please do not hesitate to contact our technicians at any
of our subsidiaries worldwide.
Thank you for choosing Fagor.
Declaration of conformity
Manufacturer: Fagor Automation, S. Coop.
Barrio de San Andrés s/n, C.P. 20500, Mondragón -Guipúzcoa- (SPAIN)
We hereby declare, under our responsibility that the product:
Fagor AC Brushless Servo Drive System.
consisting of the following modules and motors:
Servodrives: ACS Series
AC Motors: FXM Series
mentioned on this declaration,
with the basic requirements of the European Directives 73/23/CE on Low Voltage (Basic Safety
Regulation, Machinery Electrical Equipment EN60204-1:95) and 89/336/CE on Electromagnetic
Compatibility (EN 61800-3:1996, Specific Regulation on Electromagnetic Compatibility for Servo
Drive Systems).
In Mondragón, February 15th, 2000
To Next Page
Loading...
