Fagor DDS Series User Manual

Sales models
12.
Ref.1912
· 387 ·
DDS
HARDWARE
F. H12 /2
Synchronous servo motors, FKM1/2/4/6/8/9. Denominations.
0 Standard
1 Electro-ventilated
8 Low inertia
9 Low inertia and electro-ventilated ·future·
20 45 2000 rev/min 4500 rev/min
30 50 3000 rev/min 5000 rev/min
FKM . .
MOTOR SERIES
SIZE 1, 2, 4, 6, 8, 9
LENGTH 1, 2, 3, 4, 5, 6
RATED
SPEED
WINDING
A
400 V AC
FEEDBACK TYPE
A3 Multi-turn absolute sinusoidal 1Vpp encoder ·1024 ppt· ·taper shaft·
A4 Multi-turn absolute sinusoidal 1Vpp encoder ·128 ppt·
E3 Sinusoidal 1Vpp encoder ·1024 ppt· ·taper shaft·
E4
I0 TTL incremental encoder ·2500 ppt·
FLANGE
AND
0
HOLDING
OPTION
0
Without holding brake
1 With standard holding brake ·24 V DC·
2 With extra holding brake ·24 V DC·
FAN AND
INERTIA
OPTION
F 220 V AC
1 Cylindrical ·with no keyway· IP 64
40 60 4000 rev/min 6000 rev/min
01 ... 99
SPECIFICATION
Only when it has a special configuration ·K· or ·U·
2 Shaft with keyway and seal IP 65
3 Keyless shaft with seal IP 65
8
Special configuration with seal IP 65
- K
.
.
Standard
2 Optimized for ACSD-16H
3 Small size
WINDING
OPTION
PTC KTY84-130 thermistor
1
RTD Pt1000 thermoresistence
2
PTC 111-K13-140 thermistor
TEMPERATURE
SENSOR
EXTRAS
- None
K
Special configuration without NRTL mark
U
With keyway ·half-key balancing· IP 64
- 1/
- 0/
9 Special configuration IP 64
Sinusoidal 1Vpp encoder ·128 ppt·
SHAFT
BRAKE
Special configuration with NRTL mark
Note.
The encoders with reference:
-
I0 , only available on motors with “F type” winding.
-
E3/A3 , only available on motors with “A type” winding, except FKM1 series.
-
E4/A4 , only available on motors FKM1 series.
- The FKM96 sales model does not offer the “with brake” option.

Fagor DDS Series Specifications

General

Brand	Fagor
Model	DDS Series
Category	DC Drives
Language	English