Falcon E163i - Page 37

30
FAULT
POSSIBLE CAUSES
REMEDY
USER
*ENG
Unit will not turn ON
No power to unit
Check mains power is
connected and turned on

Fuse has blown
Check Fuse behind rear
terminal cover panel
(section 7.12) and
replace as necessary.

Hob cooking zones will
not operate
Switch at off position
Change hob control knob
to position 1

A reduction in
performance on hob
cooking zones.
Blocked air filter
Clean Air filter (See
section 3.1.2)

Damaged pot
Replace pot

Oven will not operate
Safety stat tripped
Call Engineer

Oven slow to heat
Faulty Element
Call Engineer

PROBLEM
POSSIBLE CAUSES
REMEDY
USER
*ENG
Food keeps burning
Oven dial setting too
high
Lower dial setting

*ENG Service engineer only.