Faller 161651 - Product Safety and Responsibility; Proper Use and Conditions

44
Safety and responsibility
EN
2. Safety and responsibility
Proper use
This product is a scale modeling article aimed at ambitious modellers and
collectors, and no toy. It is designed for use on a model installation. It may
exclusively be operated together with the accessories and add-on devices
recommended by FALLER. Basically, FALLER products are developed and
designed for the hobby sector, not for permanent operation. This product is
intended for use at average ambient temperature and relative humidity. Ple-
ase operate the product only indoors, and avoid any atmospheric influences.
Any other use will be considered not to be in conformity with the proper use
or intended purpose. Gebr. FALLER GmbH will assume no responsibility for
any damage or defect resulting from improper use or the non-observance
of the directions given in the present Instruction Manual.
Operating and storage conditions
X
Observe the following operating conditions: 15–40 °C, up to 75 % rela-
tive humidity, do not allow the formation of dew.
X
Observe the following storage conditions: 10–60° C, up to 85 % rela-
tive humidity, do not allow the formation of dew.
For your safety
X
Carefully read through the instruction manual before use.
X
Pay attention to the safety recommendations and warnings given in the
instruction manual or provided on the product.
X
Always retain the instruction manual available near to the product itself.