Need help?Do you have a question about the Faller 180725 and is the answer not in the manual?
General| Brand | Faller |
|---|---|
| Model | 180725 |
| Category | Controller |
| Language | English |
Describes the intended use of the Servo Control in model railway installations.
Lists essential safety recommendations and warnings for product use.
Warns about explosion risks in specific environments and with unsuitable servos.
Alerts to corrosion risks from moisture and water contact.
Highlights hazards of improper use, including opening the enclosure.
Provides guidance on compliant waste disposal and battery handling.
Lists the items included in the product package.
Shows and labels the physical components and ports of the Servo Control.
Details the function of each port on the Servo Control unit.
Explains the function of the control keys on the Servo Control.
Describes the meaning and behavior of the LEDs on the Servo Control.
Explains how to connect the Servo Control to the power supply.
Details connecting the 16 V AC power supply to the unit.
Guides on how to connect up to four servos to the control unit.
Explains how to connect the Servo Control to digital control systems.
Describes how to connect push buttons for servo position control.
Details how to preset servo positions and motion rates directly via the unit.
Continues the step-by-step guide for presetting servos using the unit's keys.
Explains how to preset servos using an external digital control unit.
Continues the detailed steps for presetting servos using digital control unit features.
Finalizes the process of presetting servos using digital control unit methods.
Explains presetting servos using DCC configuration variables (CVs).
Demonstrates presetting servos using configuration variables for a rocking motion.
Lists and explains the available configuration variables (CVs) for the Servo Control.
Continues the table of configuration variables for servos 1 and 2.
Continues the table of configuration variables for servos 3 and 4.
Completes the table of configuration variables, including address details and advice.
Explains how to position servos using push buttons connected to the unit.
Details how to position servos using a connected digital control unit.
Provides general information about what servos are and their types.
Explains the pulse-width modulation (PWM) principle used for servo control.
Lists the technical specifications related to the power supply of the unit.
Details the digital specifications, including addresses and formats.
Explains the meaning of various symbols used in the document and on the product.
Explains the meaning of common signs used for actions or notes.
To Next Page
