76
How to deal with problems
EN
7. How to deal with problems
Fehlermeldungen
Fault descrip-
tion
Source Remedy
Faulty functio-
nal sequence
Wrong positioning
of sensors
Wrong connection
X
Check the positions of sen-
sors
X
Check that the components
are correctly connected
Wrong func-
tioning
Program does not
match the assem-
bly
X
Check the selection of the
program
Some compo-
nents do not
function
Wrong connection
Components
damaged
X
Check that the components
are correctly connected
X
Replace the components
A vehicle does
not reliably
stop at a stop
section
Wrong polarity of
connection
X
Switch connections
Table 21: How to deal with problems
Direct line to FALLER’s customer service department:
Phone + 49 (0) 77 23 / 651-106
E-Mail kundendienst@faller.de
TIP
To Next Page
Loading...
