FANATEC DD PRO User Manual

6 6
To get started with using the GT DD PRO, decide on whether you will hard-
mount the wheel base and pedals or use the CSL DD Table Clamp, connect
your steering wheel via the Quick Release system, then connect the GT
DD PRO to your PlayStation
®
5 console or PlayStation
®
4 console using the
included USB cable. It is important to follow the chapter sequence of this
manual for an e󰀨ective assembly and setup procedure.
ATTENTION: See chapter 4.6 “Connections” for which type of peripheral
devices must be connected to which port at the rear of the GT DD PRO.
All devices have to be connected to the GT DD PRO before powering ON
to allow proper detection and operation. Only use the included USB cable
from your GT DD PRO package contents to avoid damages! Ensure there is
enough space around the wheel base to allow for air to circulate. Passive air
circulation is su󰀩cient.
ASSEMBLY
PLAN YOUR SETUP
4
4.1

FANATEC DD PRO Specifications

General

Force Feedback	Yes
Rotation Angle	Adjustable
Type	Direct Drive
Compatibility	PC, PlayStation 4, PlayStation 5
Torque	5 Nm
Power Supply	External
Connectivity	USB
Steering Wheel	Not included (compatible with Fanatec steering wheels)