FANATEC DD PRO - Page 25

21 21
Tuning Menu Button Menu Change Reset
4 seconds
6 seconds
Cycle Standard and Advanced Tuning Menu:
Pressing and hold the Tuning Menu button on your steering wheel for 4
seconds in order to switch between Standard and Advanced Tuning Menu as
illustrated below. Press and hold for an additional 6 seconds in order to reset
the Custom Setup proles to the default values. Resetting the Tuning Menu
will activate the Standard Tuning Menu.
Advanced Tuning Menu:
‘A SET’ indicates the Auto Setup prole and ‘1 SET’ to ‘5 SET’ indicates the
Custom Setup proles.
These proles allow full access to all tuning parameters without limitation.