28 28
BRF
(
BRAKE FORCE
)
5.6.15
CSP V3 / V3i: Lo 001 ... 100 Hi BRF default: 050
CSL E P LCK / CSL P LCK: Lo 010 ... 100 Hi BRF default: 050
Brake Force changes the force needed to reach 100% brake input for load
cell brake pedals and is available when a pedal set featuring a load cell
brake is connected to a wheel base via RJ12. OFF requires the least amount
of brake pressure, 100 requires the most amount of brake pressure.
NOTE: Not supported by the included CSL Pedals.
Compatibility not endorsed by Sony Interactive Entertainment Inc.
To Next Page
Loading...
