Lumina 71 Feed feeding place
17
6. Feed feeding place
6.1 Overview
Feed feeding place tab page Overview
FP.
Readout of the number of the feed place.
Numbr. Animals
Readout of the number of animals present in the feed place.
Feed cycle
Readout of the number of feeding cycles that are assigned in this feed place.
Doss. %
Readout of the dosing percentage for the feed place.
The control
computer updates the data after every day change. This means
that the current situation for the following days is shown every day.
To dos
Readout of the feed amount today.
Dosed
Readout of the feed amount that already dosed out today.
Status S F
Readout of the feed place status (BLOCK/FREE/BLOCK
). If sensors are used: readout
of sensor(S) or feedplace (F) status.
6.2 Curve FP
This tab page shows the feed curve for the selected feed place. Use the index keys to select another feed place if
required.
Feed feeding place tab page Curve FP
To Next Page
Loading...
Need help?
General
