Lumina 71 Animals feed place
33
Curve day
Setting of the actual number of days in the curve used by the control computer for
calculations.
If enter this function, do not enter the Weight per animal. This is determined
automatically based on the curve day.
Feeding method Setting of the feeding method (REGISTER, DOSING, DOSE/REGIST).
Date
Setting of the date the animals were set up on.
Laying day
Setting of the number of laying days. (usually one day)
Dosing percentage
Setting of the percentage of blend (compared to the curve) that
will be distributed at the
set feed place.
Adjustment days fixed
Setting of the fixed correction of the dosing percentage.
Adjustment days variable
Setting of the variable correction of the dosing percentage.
Also at feed place
Setting of the feed place the data have been copy from.
Thru feed place
Setting of the feed place the data have been copy to.
After setting up the feed place status automatically changes to FREE.
11.4 Mortality
Animals feed place tab page Mortality
Mortality for feed place
Setting of the feed place number where mortality occured.
Nbr of animals
Setting of the number of removed animals. The number of present animals will appear
between brackets.
Date
Setting of the mortality date.
After removing animals the control computer automatically changes the feed amount.
To Next Page
Loading...
Need help?
General
