Lumina 71 Time clock
26
8. Time clock
Time clocks can be used to activate/deactivate equipment. Various time periods can be entered per time clock. For
example, use one time clock to activate equipment from 9:00 to 11:00, from 12:00 to 14:00 and from 16:00 to 18:00.
8.1 Overview
Time clock tab page Overview Time clock tab page Set
Description
Readout of the name of the time clock.
Situation Readout of the time clock status (ON/OFF).
On
Setting the start time of the time clock.
Off
Setting the end time of the time clock.
Status
Setting of the time clock status:
• FREE: The control computer can run the time clock.
• BLOCKED: The control computer will skip the time clock.
• ONCE: The time period will be run once on the next occasion that the on time of
the time period is reached. Afterwards, the control computer sets the status to
BLOCK.
• SKIP
: The time period will be skipped next time. Afterwards, the control computer
sets the status to FREE.
In the system settings, the installer has set what
happens in the event of a power out (whereby an active
time clock is interrupted). Compensate for this interruption later by extending the time period. Contact
your installer for more information.
To Next Page
Loading...
Need help?
General
