Lumina 71 Animals feed place
35
11.6 Deliver
Animals feed place tab page Deliver
Deliver per
Setting to deliver animals per feed place or per section.
Deliver from feed place /
section
Setting of the feed place or section the animals have been delivered from.
Deliver all animals feed
place / section?
Setting if all animals of this feed place or section to be deliver:
• YES: All feed places or sections will be delivered.
• NO
: Enter the number of animals to be delivered. The other animals remain at the
feed place and the control computer automatically adjust the feeding schedule.
If all animals are delivered the control computer will block the feed place, if
this has not already been done.
Nbr of animals
Setting of the number of animals delivered.
Weight per animal
Setting of the weight per animal (kg).
Total weight
Setting of the total weight of the animals delivered (kg).
Date
Readout of the date the animals were deliver.
The control computer uses the delivery date to update all historical data. A
future delivery cannot be entered by using a future delivery date. A delivery
must be entered on the day when it actually takes places.
Consmp. factor
Setting of the consumption factor so the animals consumed less or more feed than the
average amount.
With a Consmp. Factor
of 1 the animals have consumed all the feed (100%).
If the animals have consumed 90% of the feed enter a Consmp. Factor of
0.9.
After delivering animals the data per feed place is not removed immediately. This will only be done when
the next group of animals is set up.
To Next Page
Loading...
Need help?
General
