F&F LE-03MQ CT - Measuring Voltage

LE-03MQ CT - User manual
15
5.2.4. Measurement voltage
Setting the value of the input voltage directly or through transformers.
For half-indirect 1- or 3-phase measurement set the value PT2 to 400 and PTrate to 1.
Use the buttons in the configuration
menu to select the PT option.
Input voltage.
Hold down to enter the PT2 input
voltage setting mode: from 100 to 500.
Hold down to confirm selection.
For half-indirect 1- or 3-phase measurement
set the value to 400.
PT rate.
Press to display the rate setting screen.
Range of 0001 to 9999.
Hold down to confirm selection.
For half-indirect 1- or 3-phase measurement
set the value to 1.