1.4.5.6 ANT. / RF IN
Follow the picture and plug a TV Aerial to the ANT. / RF IN socket;
1.4.5.7 ANT. / RF OUT
(1) Make sure the player is connecting to power supply;
(2) Make sure a TV Aerial is connecting to the ANT. / RF IN socket;
(3) Follow the picture and plug a TV cable to the ANT. / RF OUT socket then plug the cable to a
TV or other TV receiver.
The player can loop out the DVB-T signal to other TV receiver device. In this way, you can
watch the TV programs with another TV receiver while recording.
ENGLISH
11 / 79
To Next Page
Loading...
