1.4.8 Connecting to a WLAN
(1) Make sure the player is powered on;
(2) Plug the Wireless LAN USB Adapter (i.e. FANTEC Wi-Fi USB Dongle) to the USB HOST
port of the player.
(3) Please refer to ‘3.5 Changing Network Settings’ for more details about wireless setup
Note: The FANTEC Wi-Fi Dongle is an optional accessory sold separately. In order to avoid
incompatibilities with Wi-Fi adapters, it’s recommended to use “FANTEC WF-300MWLAN
Dongle”. The accurate function of non-FANTEC devices cannot be guaranteed.
1.5 Power On / Off
Power On
After connecting the DC IN jack and press the power button on the front panel, the player will
soon enter the home screen, and the power indicator will turn blue.
Power Off
Press the power button on the front panel, the player will soon enter standby mode, and the
power indicator will turn red. Then unplug the power cord to cut off the power supply.
1.6 Menu Language
The system language of this player can be set to English or other languages. Change the
language you wish in the setup menu, the selected language will take effect immediately.
1.7 HDD Format
For users who wish to install a new SATA HDD into the player, please refer to the following
procedures to format the hard disk on the player before usage.
ENGLISH
13 / 79
To Next Page
Loading...
