Fantec TV-LHD - A;V (Audio; Video Setting)

FANTEC TV-LHD
8-1 A/V (Audio / Video Setting)
1. Audio Out
Under this option you can set your Audio output by choosing ‘Analog’ (Analog 2 channel audio output) or
‘Digital’ (Digital audio signals through the optical or coaxial output).
2. Display
You can choose among following options to find your desired TV display.
z 4:3 letterbox: This aspect ratio displays the content based on its horizontal length. Black horizontal
bars are placed by the PLAYER at the top and bottom of the screen to be displayed in a wide mode.
z 4:3 Pan-scan: This aspect ratio displays the content based on its vertical length. It fills up the screen,
but some parts of the left and right side of the image are lost.
z 16:9: Image output in the aspect ratio of 16:9.
3. TV Standard
Your can choose PAL or NTSC TV output systems.
4. PAL Output
You can choose proper TV output among following options:
z HDMI
z C/S Video = A/V out
When you change TV output, there would be a window for confirmation comes out. Choose
‘Yes’ to continue output changing, choose ‘No’ to cancel output changing.
NOTE: Once you choose TV output, change your TV setting accordingly. For example, if you choose HDMI
as TV output, then you also need choose ‘HDMI’ output accordingly.
5. HDMI output setting
When you choose HDMI output, following 6 resolution are available.
z 576i
z 576p
z 720p
z 1080i
z 1080p
28