Fanvil i10 Quick Installation Guide

Step 3: Set DSS key
Set DSS key speed dial parameters, as shown below, click “Apply”to save this setting.
Type: Hot key.
Number 1: The DSS Key will dial to this Number 1.
Number 2: If number 1 is unavailable, it will be transferred to number 2.
Line: Working line.
Subtype: Speed Dial.
Step 4: Set the Intercom parameters

Fanvil i10 Specifications

General

Model	i10
Category	Intercom System
Ingress Protection	IP54
Ethernet	10/100 Mbps
Mounting	Wall-mounted
Audio Codec	G.711, G.722
Network Protocols	SIP, TCP/IP, UDP, RTP, RTCP, HTTP
Power Supply	PoE or 12V DC