Fanvil V62 - Advanced Call Management Features; Call Transfer and Conferencing; Call Forwarding and Do Not Disturb; Programmable Keys and Call Lists

Call transfer
Attended transfer:
1．Press Xfer soft key during the active conversation, the call is put
on hold.
2．Dial the second telephone number.
3．When the call is answered, then press Xfer soft key to complete
the operation.
Blind transfer:
1．Press Xfer soft key during the active conversation, the call will be
on hold.
2．Then enter the 2nd telephone number and press Xfer soft key.
Call forward
1．Press Menu > Features > Call Forward.
2
．
Select the line, the type of forward, enter the destination number
and status, and press OK soft key.
Call conference
1．Once in line with 1st caller, press Conf soft key, 1st caller is put on
hold.
2．Then call the 2nd number.
3．After, 2nd call is established, press Conf soft key to set up the
conference.
Programmable keys
1．You can configure shortcuts for the programmable keys.
2．Press Menu > Basic > Keyboard, select among the configurable
items, and select your desired type and value, press OK key.
Do not disturb
1．Press DND soft key, and enable the device do not disturb mode.
2．Or press Menu > Features > DND, and select the Mode and Type,
and press OK key.
Voice mail
1．To access your voice mailbox, press or Menu > Message >
Voice Message, number of messages will be indicated if provided by
your server or pbx.
2．Select the line and press Play to call.
Call list
1．Press up navigator key or Menu > CallLog > Local Call Logs
2
．
Scroll through the list using navigator key.
3．To dial an entry, press Dial soft key or pickup handset or press
or .
Phonebook
Access Phonebook:
1．Press or Contact soft key or Menu > Contact > Local
Contacts.
2．Select All Contacts or other group.
3．To dial an entry, press Dial soft key or pickup handset or press
or .
Add new entry:
1．Press Contact soft key, Press All Contacts or other group > Press
Add.
2．Enter name and number and press OK soft key.