Tightening torque:
Oil filter cartridge:
17Nm (1.7m·kgf, 12 ft·lbs)
1. Oil filler cartridge 2. Torque bolt
7. Install the engine oil drain bolt, and then
tighten it to the specified torque.
Tightening torque:
Engine oil drain bolt:
24Nm (2.4m·kgf, 17 ft·lbs)
8.
Add the specified amount of recommended
engine oil, and then install the engine oil
filler cap and tighten it.
Recommended engine oil:
See page 10-2.
Oil quantity:
Without oil filter cartridge replacement:
2.2L (1.94 lmp qt, 2.33 US qt)
With oil filter cartridge replacement:
2.3 L (2.02 lmp qt, 2.43 US qt)
1CAUTION:
In order to prevent clutch slippage (since
the engine oil also lubricates the clutch),
do not mix any chemical additives. Do
not use oils with a diesel specification of
“CD” or oils of a higher quality than
specified. In addition, do not use oils
labeled “ENERGY CONSERVING II” or
higher.
Make sure that no foreign material enters
To Next Page
Loading...