CONTROL FUNCTIONS
Ignition Switch
1. Ignition Switch
Functions of the respective switch positions
are as follows:
ON:
All electrical circuits are supplied with power,
and the headlights and taillights come on
when the light switch is on.
OFF:
All electrical circuits are switched off. The key
can be removed in this position.
START:
The electric starter is engaged by turning and
holding the key in this position. Release the
key when the engine starts.
KEY：
Turning the steering wheel can lock the
direction, while unplugging the key.
1CAUTION:
● Do not operate the electric starter
continuously for more than 5 seconds, or
starter damage could occur. Wait at
To Next Page
Loading...