Brake Light Switch Adjustment
The brake light switch, which is activated by
the brake pedal, is properly adjusted when
the brake light comes on just before braking
takes effect. If necessary, adjust the brake
light switch as follows.
1. Open the hood. (See pages 8-7—8-8 for
hood opening and closing procedure.)
2. Turn the adjusting nut while holding the
brake light switch in place. To make the
brake light come on earlier, turn the
adjusting nut in direction . To make
the brake light come on later, turn the
adjusting nut in direction .
1. Brake light switch. 2. Adjusting nut
To Next Page
Loading...