Warming up
To get maximum engine life, always warm up
the engine before starting off. Never
accelerate hard with a cold engine! To see
whether or not the engine is warm, check if it
responds to the throttle normally with the
starter (choke) turned off.
Drive select lever operation and reverse
driving
CAUTION:
Before shifting, you must stop the vehicle
and take your foot off the accelerator pedal.
Otherwise, the transmission may be
damaged.
Shifting: Neutral to Front
1. Stop the vehicle. Keep your foot off the
accelerator pedal.
2. Apply the brakes, then shift by moving
the drive select lever along the shift
guide.
NOTE:
Make sure that the drive select lever is
completely shifted into position.
1. Drive select lever
3. Release the brakes and press the
accelerator pedal gradually.