allow the engine to cool down for about 15
minutes.
1CAUTION:
The engine may overheat if the vehicle is
overloaded. If this happens, reduce the
load to specification.
After restarting, make sure that the light
is out. Continuous use while the light is
on may cause damage to the engine.
High beam indicator
The light being on means headlight is at high
beam mode.
Position light indicator
The light being on means that the position
light fixed in the front headlight has been
turned on.
Coolant temperature warning indicator
“ ”
When the coolant temperature reaches to a
specified level, this light comes on to warn
that the coolant temperature is too hot. If the
light comes on during operation, stop the
engine as soon as possible. It is safe to do so
and allow the engine to cool down for about
15 minutes.
CAUTION
The engine may overheat if the UTV is
overloaded. If this happens, reduce the load
to specification.
After restarting, make sure that the light is
out. Continuous usage while the light is on
may cause damage to the engine.
To Next Page
Loading...