On-Command Four-Wheel-Drive Switch
“2WD/4WD”
1. On-Command four –wheel-drive switch “2WD/4WD”
2. Select lever
To change from 2WD to 4WD
stop the vehicle, be sure the select lever is
set to position ，and then set the switch to
“4WD”. When the vehicle is in 4WD, the
4WD indicator “ ” will come on in the
multi-function display.
To change from 4WD to 2WD
stop the vehicle, and then set the switch to
“2WD”。the 4WD indicator “ ” will go out in
the multi-function display.
On-Command Differential Gear Lock
Switch “4WD/LOCK”
1. On-Command differential lock switch “4WD/LOCK”
2. Select lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to “4WD”,
move the select lever to position , and then
To Next Page
Loading...