1: Introduction
1
Introduction
Thank you for purchasing FAS-CAM Dash Mount Camera.!
This User Manual introduces information on how to operate your FAS-CAM. Before using your
FAS-CAM, we strongly recommend that you read through this User Manual to ensure proper
operation and full machine performance. For product performance improvement purpose, the
contents of this User Manual and product specifications may change without prior notice.
We highly recommend using Lexar microSD cards with FAS-Alliance dash cams. Our dash cams have been tested specifically for use
with Lexar branded SD cards. We recommend using at least a 64GB U3 card for the F701-DR series. If connecting to our rear cam, we
advise using a 64GB U3 or 128GB U3 card for best results. The F701-DR series supports up to 256GB max microSD cards.!
For those looking to use FAS-CAPTURE, FAS-MODE, or Parking Mode frequently, we recommend using a microSD card larger than
32GB due to the size capacity. However, a 32GB card can be used for regular use. Other brands of microSD cards may cause the
processor to overheat and are not recommended. Please note that using an unrecommended brand may cause your warranty to be
voided.!
Lexar® Professional 1066x microSDXC™ UHS-I Cards SILVER Series"- Best option for long term use!
Lexar® microSDHC/microSDXC UHS-I Cards E-Series"- Acceptable option!
When you first-time starting your FAS-CAM, please make sure to format your TF Card (SD Card) with your FAS-CAM, see chapter “7.3.3
Format TF Card (SD Card)” to continue this option.
Note
To Next Page
Loading...