FASTRON. VC-210 - Setting Instant On; Entering Instant On Programming; Programming Instant On for Products

Process Controllers
FAST Lit. Part No. 229-51311 Rev. E (MANAGER) 24SEP2010 Page 16
 2005-2010 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
SET INSTANT ON (6647)
KEY PRESS
DISPLAY
ACTION
1
Enter Program mode
OR
• To enter programming mode, press and
hold the "P" key for 3 seconds.
• Scroll to “Programming.”
• Press the “P” key.
• The display will prompt user to enter a
pass code.
2
Enter Pass Code
ENTER CODE
****
• Enter pass code 6 6 4 7.
• Press the “P” key to lock in your entry.
• Scroll to “Instant On.”
• Press the “P” key.
3
SELECT PRODUCT TO
PROGRAM
• Select a Product Key
4
INSTANT ON
:XX
• Use Product Keys to enter 0-60.
5
SELECT PRODUCT TO
PROGRAM
• To program additional products, select
another product key.
6
Exit Instant On
Programming
OR
• Scroll to Exit.
• Press the “P” key to return to idle mode.