EasyManua.ls Logo

FCI 7100 SERIES - Page 33

FCI 7100 SERIES
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inputs
Select
View
# keys: enters loop & address (restriction: Address 200)
< >: Scrolls up or down to next available device.
OK: Accepts address, opens Configure Input Device Menu,
Configure Output Device Menu, Control Output Menu, or
Enable/Disable Device Menu, as appropriate.
1: Opens Set Input Type Menu.
2: Opens Assign Input To Group Menu.
3: Opens Set Verify/PAS Function Menu (sensors only).
4: Opens Set Sensitivity Menu (Ion, Photo devices only).
5: Opens Set SLC Device Location Menu.
6: Displays all settings for current device.
7: Copies all settings of the specified device (last input modified).
<>: scroll through types which match this physical device.
# keys: enter type number (no restrictions; see type table)
Shows type and associated Response.
BKSP/EDIT: If selected device type is editable, or if it is not edit-
able but there is room to create a new user- editable type, opens
Add Type menu (Menu 35). ^ indicates that editing is possible.
No restrictions on group assignment
Options are: Default, None, Smoke Verify (Ion/Photo only), PAS
1: Scrolls through Day Sensitivity options.
2: Scrolls through Night Sensitivity options.
Options vary by type, may include: Default, 1.00%, ... 2.00%
Shows: Loop and Address, Device Type, Location Lbel, Device
Response, and I/O Group. Shows Verify/PAS settings and day
sensitivity setting if applicable (if device is set for default
sensitivity, shows default day sensitivity). No changes can be
made.
[L,AAA] 1: Verification (Default)
[L,AAA] Ion Duct Det FLR2 Storeroom
Alarm Grp23 Vfy:Default 1.75%
[SELECT] Loop,Address: 1,001
[DEVICE] Key in or use <,>
[L,AAA] Group 007 (00=no group)
[GROUP] Key in Group# or use <,>
[L,AAA] Ion Duct Det 01 (Alarm)
[TYPE ] ^ Key in Input Type # or use <,>
[CONFIG] 1:Type 2:Group 3:Verify 4:Sens
[L,AAA ] 5:Location 6:View 7:Copy L,AAA
Main
Config
Inputs or Outputs
——————— or ——————-
Main
I/O
Control or Ena/Dis
Main
Config
Inputs
Select
Main
Config
Inputs
Select
Type
[L,AAA] 1:Day Sensitivity (Default)
[SENS ] 2:Night Sensitivity (Default)
Inputs
Select
Group
Inputs
Select
Verify
Inputs
Select
Sens
9000-0447 31 of 43
Technical Manuals Online! - http://www.tech-man.com

Table of Contents