FLUID COMPONENTS INTERNATIONAL LLC ST50/ST75 PDA SOFTWARE
About This Manual
This manual is designed to quickly familiarize you with the use of the Configuration Software. It describes all you need to know
to effectively use the configurator during the commissioning, operational, and maintenance phases.
• Viewing Process data, Flow, Temperature, and Totalizer
• Configuring the ST50/ST75 i.e. Pipe size, Type, Process units, etc.
• Troubleshooting
• Viewing the ST50/ST75 Configuration
After you become familiar with the basic functionality of the Configuration Software, you can use the rest of this manual as a
reference guide for less common tasks.
This page is subject to proprietary rights statement on last page. 2 06EN003372 Rev. -
To Next Page
Loading...
