FCI ST75 - Safety, Approvals, and Conditions; Approval Information

ST75/ST75V Mass Flow Meter Fluid Components International LLC
This page is subject to proprietary rights statement on last page 17 06EN003368 Rev. G
Appendix A - Approval Information
EU
Information
Flow/Liquid Level/Temperature Instrumentation
Visit FCI on the Worldwide Web: www.fluidcomponents.com
1755 La Costa Meadows Drive, San Marcos, California 92078 USA 760-744-6950  800-854-1993  760-736-6250
European Office: Persephonestraat 3-01 5047 TTTilburg – The Netherlands – Phone 31-13-5159989  Fax 31-13-5799036
Doc no. 23EN000019E
EU DECLARATION OF CONFORMITY ST51 SERIES
We, Fluid Components International LLC, located at 1755 La Costa Meadows Drive, San Marcos, California 92078-
5115 USA, declare under our sole responsibility that the ST51 Flowmeter Product Family (ST51, ST75, ST75V,
ST51A, ST75A, ST75AV), to which this declaration relates, are in conformity with the following standards and
Directives.
Directive 2014/34/EU ATEX
Certified by FM Approvals LLC (1725): 1151 Boston-Providence Turnpike, Norwood, MA 02062, USA
EC-Type Examination Certificate:
FM16ATEX0008X satisfies EN 60079-0:2012/A11:2013, EN 60079-1:2014, EN 60079-31:2014 and EN
60529:1991 +A2:2013 requirements for use in hazardous areas.
Hazardous Areas Approval FM16ATEX0008X
II 2 G Ex db IIC T6…T1 Gb
II 2 D Ex tb IIIC T85°C…T300°C Db; IP66/IP67
Ta = -40°C to +65°C
Directive 2014/30/EU EMC
Immunity specification: EN 61000-6-2: 2005
Emissions specification: EN 61000-6-4: 2007, +A1:2011
Directive 2014/35/EU Low Voltage
Electrical Safety Specification: EN 61010-1: 2010 +C1: 2011 +C2: 2013
Directive 2014/68/EU Pressure Equipment (PED)
The ST51/ST51A (Insertion Style) models do not have a pressure bearing housing and are therefore not
considered as pressure equipment by themselves according to article 2, paragraph 5.
The ST75/ST75A, ST75V/ST75AV (In-line Style) models are in conformity with Sound Engineering Practices
as defined in the Pressure Equipment Directive (PED) 2014/68/EU article 4, paragraph 3.
Directive 2011/65/EU RoHS 2
The ST51 Product Family is in conformity with Directive 2011/65/EU of the European Parliament and of the
Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and
electronic equipment.
Issued at San Marcos, California USA
June, 2016
______________________________________
Manuel Liong, Qualifications Engineer
Manuel Liong
2016.06.21 18:00:33
-07'00'