Feasycom FSC-Blueware - Read Firmware Version; Read BR;EDR MAC Address

To Next Page

To Previous Page

Controller and Target cannot be enabled both because of mutual exclusion.

Module will soft reboot if profile selection changed

Example: Read current profile selection

AT+PROFILE

+PROFILE=1195

Example: Enable SPP, GATT Server, HFP Source, A2DP Source profile, disable the others

AT+PROFILE=83

2.1.3. Read Firmware Version

Format: AT+VER

Response: +VER=Param

Param: Firmware version

Example: Read module’s firmware version

AT+VER

+VER=FSC-BT805B, V1.0.0,20160120

2.1.4. Read BR/EDR MAC Address

Format: AT+ADDR

Response: +ADDR=Param

Param: Module’s BR/EDR MAC address (12 Bytes ASCII)

Example: Read Module’s BR/EDR MAC address

AT+ADDR

+ADDR=DC0D30123456