Feasycom FSC-Blueware - Accept;Reject Remote Pairing Request; Read;Write Class of Device; Read;Clear Paired Record

13
Response: +SSP=Param
2.1.10. Accept/Reject Remote Pairing Request
Format: AT+CFM=Param1, Param2
Param1: 12 Bytes MAC address of remote device
Param2: 0/1
(0)
Reject remote pairing request
(1)
Accept remote pairing request
Description: Only used for pairing request in pairing mode 3, see AT+SSP
2.1.11. Read/Write Class of Device
Format: AT+COD{=Param}
Param: Class of device (6 bytes ASCII, default:240404 Handsfree device)
Response: +COD=Param
2.1.12. Read/Clear Paired Record
Format: AT+PLIST{=Param}
Param:(0/1~8/12 Bytes MAC address)
(0)
Clear all paired record
(1~8)
Clear specific paired record with index
(MAC)
Clear specific paired record with MAC address
Response1: +PLIST=Param1, Param2, Param3{, Param4}
Param1: (1~8) Paired device’s index
Param2: (MAC) Paired device’s MAC address
Param3: A base-10 representation of a bit field, support profiles of device, see AT+PROFILE
Param4: (UTF8) Paired device’s name
Response2: +PLIST=E: End of the paired record
Example: Read module’s paired record
<<
AT+PLIST