Feasycom FSC-Blueware - Read;Write BLE Local Name; Configurable; Read;Write Pin Code <Configurable; Read;Write Pairing Mode

12
2.1.7. Read/Write BLE Local Name
<configurable>
Format: AT+LENAME {=Param1{, Param2}}
Param1: BLE local name (1~25 Bytes ASCII, default: FSC-BT90X-LE)
Param2: MAC address suffix (0/1, default:0)
(0)
Disable suffix
(1)
Enable suffix “-XXXX” (lower 4 bytes of MAC address) after local name
Response: +LENAME=Param
2.1.8. Read/Write Pin Code
<configurable>
Format: AT+PIN{=Param}
Param: Pin code (4~15 Bytes ASCII, default:0000)
Response: +PIN=Param
Example: Read module’s pin code
<<
AT+PIN
>>
+PIN=0000
>>
OK
Example: Change module’s pin code to “12345678”
<<
AT+PIN=12345678
>>
OK
Description: Pin code only work in legacy pairing mode, see AT+SSP
2.1.9. Read/Write Pairing Mode
<configurable>
Format: AT+SSP{=Param}
Param: Pairing mode (0~3, default:2)
(0)
Legacy pairing, use pin code for pairing
(1)
Secure simple pairing, auto pairing
(2)
Secure simple pairing, display yes/no in pairing
(3)
Secure simple pairing, passkey compare, user need to accept/reject pair request