Feasycom FSC-Blueware - Read;Write Trust Device List Size; Configurable; Scan Nearby Devices; Release All Connections

14
>>
+PLIST=1,32808,1C5CF226D773, iPhone
+PLIST=2,40, A0BC30075421, Samsung S8
+PLIST=E
>>
OK
Example: Clear module’s paired record
<<
AT+PLIST=0
>>
OK
2.1.13. Read/Write Trust Device List Size
<configurable>
Format: AT+TDL{=Param}
Param:(0~8, default:0)
(0)
Auto mode: Latest paired record will replace the oldest one if paired list full
(1~8)
Limit mode: Device will not enter discoverable mode if paired list full
Response: +TDL=Param
2.1.14. Scan Nearby Devices
Format: AT+SCAN=Param1{, Param2{, Param3}}
Param1:(0~3)
(0)
Stop scan
(1)
Scan nearby BR/EDR devices
(2)
Scan nearby BLE devices
(3)
Scan nearby BR/EDR/BLE devices
Param2:(1~48) Scan period. unit:1.28s, default:12.8s
Param3:(1~25 Bytes ASCII) Name filter. Filter scan results with name if set
Description: Refer to Chapter 3 for format description of scan result
2.1.15. Release All Connections
Format: AT+DSCA
Description: Module release all Bluetooth connections with remote device