Feasycom FSC-Blueware - Audio;Video Commands (A2 DP;AVRCP)

19
2.3. A2DP/AVRCP Commands
2.3.1. Read A2DP State
Format: AT+A2DPSTAT
Response: +A2DPSTAT=Param
Param:(0~5)
(0)
Unsupported
(1)
Standby
(2)
Connecting
(3)
Connected
(4)
Paused
(5)
Streaming
2.3.2. Establish A2DP Connection
Format: AT+A2DPCONN{=Param}
Param: MAC address of target device (12 Bytes ASCII)
Description: Module will reconnect to last A2DP device if no parameter exist
Example: Connect to last A2DP device
<<
AT+A2DPCONN
>>
OK
Example2: Connect to specific A2DP device with MAC address
<<
AT+A2DPCONN=1C5CF226D773
>>
OK
2.3.3. Release A2DP Connection
Format: AT+A2DPDISC
Description: Release current A2DP connection with remote device