Feasycom FSC-Blueware - FSC-Blueware Commands; General Purpose AT Commands

9
2. Command Table
2.1. General Commands
2.1.1. AT Command Test
Format: AT
Response: OK
Description: Test the communication between HOST and Module after power on, UART
baudrate changed and etc.
Example: AT command test
<<
AT
>>
OK
2.1.2. Bluetooth Profile Selection
<configurable>
Format: AT+PROFILE{=Param}
Param: A base-10 representation of a bit field, default:1192, for each bit:
BIT[0]
SPP (Serial Port Profile)
BIT[1]
GATT Server (Generic Attribute Profile)
BIT[2]
GATT Client (Generic Attribute Profile)
BIT[3]
HFP Sink (Hands-Free Profile)
BIT[4]
HFP Source (Hands-Free Profile)
BIT[5]
A2DP Sink (Advanced Audio Distribution Profile)
BIT[6]
A2DP Source (Advanced Audio Distribution Profile)
BIT[7]
AVRCP Controller (Audio/Video remote controller Profile)
BIT[8]
AVRCP Target (Audio/Video remote controller Profile)
BIT[9]
HID Keyboard (Human Interface Profile)
BIT[10]
PBAP Server (Phonebook Access Profile)
BIT[15]
iAP2 (For iOS devices)
Response: +PROFILE=Param
Description: GATT Server and Client, HFP Sink and Source, A2DP Sink and Source, AVRCP