Feasycom FSC-Blueware - SPP Commands; Read SPP State; Establish SPP Connection; Release SPP Connection

To Next Page

To Previous Page

2.5. SPP Commands

2.5.1. Read SPP State

Format: AT+SPPSTAT

Response: +SPPSTAT=Param

Param:(0~3)

(0)

Unsupported

(1)

Standby

(2)

Connecting

(3)

Connected

2.5.2. Establish SPP Connection

Format: AT+SPPCONN=Param

Param: MAC address of target device (12 Bytes ASCII)

2.5.3. Release SPP Connection

Format: AT+SPPDISC

Description: Release current SPP connection with remote device

2.5.4. Send Data Via SPP

Format: AT+SPPSEND=Param1, Param2

Param1: Payload length (1~492)

Param2: Payload (1~492Bytes UTF8)

Example: Send data “1234567890” to remote device via SPP

AT+SPPSEND=10,1234567890