Feasycom FSC-Blueware - HFP Device Network Operator Selection; HFP Device Roaming State; HFP Device Battery Level; HFP Device Manufacture

28
Param:(0~5) Network signal strength of remote device
3.2.5. HFP Device Network Operator Selection
Format: +HFPNET=Param
Param:(UTF8) Network operator selection of remote device
3.2.6. HFP Device Roaming State
Format: +HFPROAM=Param
Param:(0/1) Roaming state of remote device
3.2.7. HFP Device Battery Level
Format: +HFPBATT=Param
Param:(0~5) Battery level of remote device
3.2.8. HFP Device Manufacture
Format: +HFPMANU=Param
Param:(UTF8) Manufacture name of remote device
3.2.9. HFP Phone Subscriber Number
Format: +HFPNUM=Param
Param:(ASCII) Phone subscriber number of remote device
3.2.10. HFP Ringing
Format: +HFPRING=Param
Param:(0/1) In-band ringtone supported