Feasycom FSC-Blueware - Release HFP Connection; Dial;Redial Phone Number; Send DTMF Code

17
Example: Connect to last HFP device
<<
AT+HFPCONN
>>
OK
Example2: Connect to specific HFP device with MAC address
<<
AT+HFPCONN=1C5CF226D773
>>
OK
2.2.4. Release HFP Connection
Format: AT+HFPDISC
Description: Release current HFP connection with remote device
2.2.5. Dial/Redial Phone Number
Format: AT+HFPDIAL{=Param}
Param: Phone number (1~25 Bytes ASCII)
Description: Dial specific number if parameter existence, otherwise redial
Example: Redial
<<
AT+HFPDIAL
>>
OK
Example: Dial number “075527924639”
<<
AT+HFPDIAL=075527924639
>>
OK
2.2.6. Send DTMF code
Format: AT+HFPDTMF=Param
Param: DTMF code (0~9/#/*)
Example: Send DTMF code “#” while talking
<<
AT+HFPDTMF=#
>>
OK