TWIN ROTOR MIMO SYSTEM
Installation and Commissioning Contents
33-007-0 TOC 1
TABLE OF CONTENTS
1. INTRODUCTION 1-1
1.1 Required Equipment 1-1
1.2 Feedback Ltd supplied items 1-2
2. MECHANICAL ASSEMBLY 2-1
3. SWITCH AND JUMPER SETTINGS FOR THE PCL-812 CARD 3-1
3.1 Switch settings - 16 bit board 3-2
3.2 Jumper Settings 3-3
3.3 Switch SW1 settings for 8 bit full length PCL - 812 board 3-4
4. INSTALLATION OF THE PCL-812 CARD AND CABLES 4-1
5. COMMISSIONING AND TEST SOFTWARE 5-1
5.1 starting the software 5-1
5.2 SOFTWARE Operation 5-1
5.3 Description of screen controls and displays. 5-3
6. TEST SEQUENCE 6-1
To Next Page
Loading...