Feig Electronic TST FUZ2-B User Manual

ATTENTION!
IMPORTANT SAFETY
INFORMATION
The specifications of
these instructions
require compliance to
ensure personal safety.
Store these instructions
safely.
Original operating instructions
TST FUZ2
Variants
-A / -B / -C /
-CX / -G / -L
DE
ACHTUNG! WICHTIGE SICHERHEITSANWEISUNGEN!
Den Hinweisen auf Seite 2 dieser Montageanleitung ist Folge zu leisten.
EN
ATTENTION! IMPORTANT SAFETY INFORMATION!
Follow the instructions on page 2 of this manual.
FR
ATTENTION! IMPORTANTES INDICATIONS DE SÉCURITÉ!
Les instructions de la page 2 de cette notice de montage doivent être
observées strictement,
NL
LET OP! BELANGRIJKE VEILIGHEIDSINSTRUCTIES!
Volg de instructies op pagina 2 van deze montagehandleiding op.
IT
ATTENZIONE! INDICAZIONI SULLA SICUREZZA IMPORTANTI!
Prestare attenzione alle note alla pagina 2 delle presenti istruzioni di
montaggio.
ES
ATENCIÓN INDICACIONES IMPORTANTES DE SEGURIDAD!
Deben seguirse las indicaciones detalladas en página 2 de estas
instrucciones de montaje.
DA
PAS PÅ! VIGTIGE SIKKERHEDSANVISNINGER
Oplysningerne på side 2 i denne monteringsvejledning skal følges.
Assembly instructions
Installation, commissioning, utilization and maintenance

Feig Electronic TST FUZ2-B Specifications

General

Brand	Feig Electronic
Model	TST FUZ2-B
Category	Controller
Language	English

Summary

Assembly Instructions

Safety Instructions

Outlines critical safety advisories for installation, startup, and operation.

Safety Functions in Accordance with EN 12453:2017

Specifies requirements for safety-related signals and their compliance.

Installation of the Controller

Housing Variants

Presents different housing options for device configurations.

Electrical Connection

Power Supply Voltage Without Main Switch

Power Supply Voltage With Main Switch

Motor and Brake

Covers the wiring and connection for the motor and brake components.

Safety Edge on Integrated Evaluation

Explains how to connect safety edges to the integrated evaluation system.

Safety Edge at the 2nd Integrated Evaluation (Input 10)

Describes connecting safety edges to the second integrated evaluation input.

Light Curtain TST LGB

Covers the installation and connection of the TST LGB light curtain.

Limit Switch Connection

Explains how to connect various types of limit switches.

General Operating Instructions to Set Parameters

Open the Parameter Operation Mode

Editing a Selected Parameter

Basic Settings

Automatic Query of Basic Data

Outlines the automatic parameter query process for initial setup.

Commissioning

With Absolute Encoder or Incremental Encoder

Guides commissioning using absolute or incremental encoders.

With Mechanical Limit Switches

Details the commissioning process with mechanical limit switches.

With Light Curtain TST LGB

Explains the commissioning steps for the TST LGB light curtain application.

Messages

Error Messages

Lists common error codes, descriptions, and their possible causes.

Information Messages