Feig Electronic TST FUZ2 User Manual

ATTENTION!
IMPORTANT SAFETY
INFORMATION
The specifications of
these instructions
require compliance to
ensure personal safety.
Store these instructions
safely.
Original operating instructions
TST FUZ2
Variants
-A / -B / -C /
-CX / -G / -L
DE
ACHTUNG! WICHTIGE SICHERHEITSANWEISUNGEN!
Den Hinweisen auf Seite 2 dieser Montageanleitung ist Folge zu leisten.
EN
ATTENTION! IMPORTANT SAFETY INFORMATION!
Follow the instructions on page 2 of this manual.
FR
ATTENTION! IMPORTANTES INDICATIONS DE SÉCURITÉ!
Les instructions de la page 2 de cette notice de montage doivent être
observées strictement,
NL
LET OP! BELANGRIJKE VEILIGHEIDSINSTRUCTIES!
Volg de instructies op pagina 2 van deze montagehandleiding op.
IT
ATTENZIONE! INDICAZIONI SULLA SICUREZZA IMPORTANTI!
Prestare attenzione alle note alla pagina 2 delle presenti istruzioni di
montaggio.
ES
ATENCIÓN INDICACIONES IMPORTANTES DE SEGURIDAD!
Deben seguirse las indicaciones detalladas en página 2 de estas
instrucciones de montaje.
DA
PAS PÅ! VIGTIGE SIKKERHEDSANVISNINGER
Oplysningerne på side 2 i denne monteringsvejledning skal følges.
Assembly instructions
Installation, commissioning, utilization and maintenance

Feig Electronic TST FUZ2 Specifications

General

Brand	Feig Electronic
Model	TST FUZ2
Category	Controller
Language	English

Summary

Assembly Instructions

Important Safety Information

Crucial safety guidelines for personal protection and safe operation of the controller.

General Description and Intended Use

Specifies the controller's design for industrial/commercial doors and compliance with standards.

Safety Instructions and Functions

General safety warnings, functions, and compliance with EN 12453:2017.

Controller Installation and Housing

Installation Guidelines and Precautions

Critical guidelines for safe installation, including power off and handling precautions.

Housing Variants

Presents the different housing options available for the controller.

Steel and Stainless Steel Housings

Details housing dimensions for steel and stainless steel variants.

Electrical Connections

Power Supply and Motor Connection

Illustrates connecting power supply, main switch, motor, and brake systems.

Safety and Input/Output Interfaces

Safety Edge and Limit Switch Connections

Details connecting safety edges and limit switches to the controller.

Door Control Components

Covers light curtains, photo eyes, and other input/output devices.

Input and Output Overviews

Presents diagrams of controller input and output terminals and their functions.

Optional Plug-in and Expansion Cards

Wireless Receiver and Detectors

Describes wireless receiver and induction loop detector modules.

Safety Edge Monitors and Expansion Boards

Covers safety edge monitors and general-purpose expansion boards.

Parameter Settings and Commissioning

Parameter Operation and Settings

Guides users through accessing, editing, and setting controller parameters.

Basic Settings and Commissioning

Covers initial setup, automatic data query, and controller commissioning.

Movement Optimization

Details optimizing door movement via speed ramps and pre-limit switches.

Messages and Specifications

Error and Information Messages

Provides comprehensive lists of error and information messages with causes.

Technical Specifications

Lists the technical specifications of the controller and its variants.