Feig Electronic TST FU3F-A User Manual

FEIG ELECTRONIC GmbH
Page 1 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
TST FUF2
TST FU3F
Variants
-A / -C / -F
Assembly instructions
Installation, commissioning, utilization and maintenance
DE
ACHTUNG! WICHTIGE SICHERHEITSANWEISUNGEN!
Den Hinweisen auf Seite 2 dieser Montageanleitung ist Folge zu leisten.
EN
ATTENTION! IMPORTANT SAFETY INFORMATION!
Follow the instructions on page 2 of this manual.
FR
ATTENTION! IMPORTANTES INDICATIONS DE SÉCURITÉ!
Les instructions de la page 2 de cette notice de montage doivent être
observées strictement,
NL
LET OP! BELANGRIJKE VEILIGHEIDSINSTRUCTIES!
Volg de instructies op pagina 2 van deze montagehandleiding op.
IT
ATTENZIONE! INDICAZIONI SULLA SICUREZZA IMPORTANTI!
Prestare attenzione alle note alla pagina 2 delle presenti istruzioni di
montaggio.
ES
ATENCIÓN INDICACIONES IMPORTANTES DE SEGURIDAD!
Deben seguirse las indicaciones detalladas en página 2 de estas
instrucciones de montaje.
DA
PAS PÅ! VIGTIGE SIKKERHEDSANVISNINGER
Oplysningerne på side 2 i denne monteringsvejledning skal følges.
ATTENTION!
Important Safety
Instructions
The specifications of
these instructions
require compliance to
ensure personal safety.
Store these instructions
safely.
Original operating instructions

Feig Electronic TST FU3F-A Specifications

General

Brand	Feig Electronic
Model	TST FU3F-A
Category	Controller
Language	English

Summary

General Description and Intended Use

Safety Instructions

General Safety Precautions

Stresses adherence to installation, wiring, and operational safety advisories.

EC Machinery Directive and Qualified Personnel

Mandates qualified personnel for installation and proper controller integration per EC directive.

User Restrictions and Device Identification

Prohibits use by untrained individuals and requires proper device labeling.

Safety Functions per EN 12453:2017

Safety Signal Requirements and Chain Integrity

Details PL "c" and Cat. 2 requirements for safety signals and the entire safety chain.

Testing Safety Functions

Illustrates connection examples and parameter settings for function testing.

Controller Installation

Safe Installation Practices

Mounting Frame and Drilling Dimensions

Housing Clearance Requirements

Mounting Control Electronics

Housing Variant Dimensions

Mounting Board Variant in Steel Housing

Electrical Connections

Safe Wiring and Power-On Procedures

Emphasizes safety during wiring, testing, and maintenance, including voltage hazards.

Power Supply Connection

Illustrates power cable connection for TST FUF2 and TST FU3F models.

Motor and Brake Connections

Details connecting motor and brake cables, including shielding and ferrite use.

Safety Edge Connections

Explains connecting electrical and optical safety edges for integrated evaluation.

Safety Edge Input 10 Connections

Details connecting optical and electrical resistance safety edges to input 10.

Light Curtain TST LGB Installation

Covers the installation and connection of the TST LGB light curtain as a safety device.

Limit Switch Connections

Describes connecting various limit switch types, including encoders and mechanical switches.

Photo Eye Connection

Illustrates the connection diagram for a photo eye sensor.

External Triggering Devices

Explains the connection of external controls like stop buttons.

Traffic Light Connection

Shows how to connect a traffic light for indicating door status.

Overview of Controller Outputs

Overview of Controller Inputs

Parameter Settings and Commissioning

Accessing and Modifying Parameters

Controller Reset and Extended Configuration

Basic Settings and Automatic Data Query

Commissioning Process Steps

Teach-in Procedures for End Positions

Performance Tuning (Boost)

Movement Optimization

Technical Specifications