Feig Electronic TST FU3F-A - Induction Loop Detector TST SUVEK

TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 59 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
6.2 Induction loop detector TST SUVEK
The Induction loop detector is available in versions TST SUVEK-1 and TST SUVEK-2.
Depending on the type, 1 or 2 loops may be monitored.
Loop 2
Loop 1
Figure 35: Detector card
To activate the slot for the detector, parameter P.803 must be set to 0302.